Skip to content

Embedded Design Services

Converting Concept to Reality



  • VLSI Hardware design services
    We have experience in Front End RTL chip design.
    Verification services for Application-Specific Integrated Circuit (ASIC),
    Field Programmable Gate Array (FPGA),
    System On Chip(SOC) for our global clients and partners
    In-depth knowledge and extensive experience in
    Verification Methodology Manual (VMM),
    Open Verification Methodology (OVM),
    Unified Verification Methodology (UVM),
    Reference Verification Methodology (RVM),
    E Reuse Methodology (ERM) methodology based verification Processor board,
    Field-Programmable Gate Array (FPGA),
    Pre-silicon and Post-silicon validation

  • Embedded Services

  • We have Hardware development experience in the areas of Automotive, Embedded, and Telecom, etc.
    We provide services in Consumer Electronics, Portable devices, Healthcare & Industrial.
    Firmware, Device drivers, and BSP development services
    We do embedded software and firmware development,
    We do image processing, Machine Vision, and Remote sensor networks.
    We do our engineering team has project experience in services for services in Board Support Packages (BSPs),
    We do Boot-loader services,
    Debug utilities,
    Operarting System Work,
    We do Interrupt and error handler work,
    Hardware Abstraction Layer (HAL),
    We do Interoperability with kernels under various operating systems.
    Device drivers for all on-board components Real-Time Clock (RTC)
    We do Universal Asynchronous Receiver and Transmitter (UART),
    Inter-Integrated circuits(I2C),
    Serial Peripheral Interface (SPI),
    RS-232 and Bus interfaces PCI, ISA, PCI-X.
    Drivers for external I/O interfaces,
    Audio and Video interfaces,
    MMIs like LED/LCDs,
    Touch screen panels,
    Network interfaces,
    storage devices and flash memory.

  • Automotive and Automation Protocols
    Controller Area Network (CAN bus),
    Unified Diagnostic Service (UDS),
    Keyword Protocol 2000 (KWP200),
    Society of Automotive Engineers standard (SAE J1939),
    Local Interconnect Network (LIN),
    FlexRay, MOST, Modbus, ZigBee, and Profinet,
    We do provide protocol DeviceNet, Industrial Ethernet, and RS422/RS845.
    CANOpen RTOS development.
    Automotive communication protocol stacks and connectivity solution:
    We do Design, Development, Porting, Integration, and testing of Protocol stacks,
    We do Driver development for communication modules,
    We do Application layer stacks,
    Standard and customer-specific communication modules,
    We do PC tools – Analysers, simulators, and data loggers,
    Embitel has in-depth expertise in the Development of the boot loader,
    We do KWP2000 stack for various automotive embedded ECUs,
    We provide Diagnostics over K-Line (ISO14230),
    We do Implementation of UART, K-Line drivers, flash drivers, KWP2000 based boot loader.
    KWP2000 diagnostics stack.
    Human Machine Interface (HMI) and User Interface (UI) design services use the design and technology expertise of our team to deliver the best UI and UX. Our services include design and Development of Web-based HMI, hand-held devices, and infotainment systems, Development of multi-platform HMI and UI application,
    Development of user-friendly UI controls, Custom controls, and ActiveX controls, Development of the application using design patterns relevant for an application,
    Providing an extension point for add-on plug-ins,
    We do OpenGL, 2D, and 3D graphics and Multimedia,
    Multilingual support,
    Support for networking.

  • Mechanical Design Services
    Energy Dispersive Spectroscopy (EDS) addresses the mechanical design requirement for product engineering with 3D modeling.
    We do Rapid prototyping techniques to provide early user experience during the product development cycle.
    It also has expertise in re-engineering and tears down analysis for product life extension.
    With its eco partner,
    Energy Dispersive Spectroscopy (EDS) provides manufacturing and support to complete mechanical engineering.
    Requirements for New Product Development (NPD).
    With its expertise in tools and customized processes,
    Energy Dispersive Spectroscopy (EDS) brings reliable, feature-rich products at competitive prices with the least development lead time.
    Mechanical Design services also include engineering drawing conversion, Industrial design requirements, and man-machine interface requirements.

Other Projects

neve web design studio 10
neve web design studio 11

Let’s work together on your next web project

Do you have an exciting new project that you want to work together on? We’d love to hear from you! Get in touch with us to start your new project.